1. Lay the first sheet at right
angles to the eaves. |
2. Fix the elements on the
sub-structure using the
Clip Fix screws provided.
|
3. Place the next sheet on the
prefabricated seam and clip it in. |
4. Transportation on the building
site is no problem due to its light weight..
|
5. Large roof surfaces are covered very quickly. |
6. The longitudinal correction
can be carried out without
problems. |
7. Trim the end sheet accordingly.
Use a trimmer or similar to do so but never an angle grinder!
|
8. Bend the end sheet upwards. |
9. Install the ridge spacing profile No. 28 on every second sheet. |
10. Screw on the ridge courses
with approx. 10 cm of overlap.. |
11. Fix the flashing No. 27.
Don’t forget the sealing compound. |
... and your LM Clip seam roof is complete! |
